General Outlook And Technical Specifications; Assembly Of Ice Maker - CombiSteel 32KG/24H Gebrauchsanweisung

2. General Outlook and Technical Specifications

Technical Table
Product code
Ice making capacity (kg)*
Storage capacity (kg)
Ice type
Cooling system
Climate type
Refrigerant gas
Product dimensions (WxDxH)
Packing dimensions (WxDxH)
(*) Indicates the daily ice making capacity of the product at 10 OC Ambient and 20 OC Water Inlet temperature.

3. Assembly of Ice Maker

Place Selection for Your Product
Your product should not be in direct contact with heat sources and should not be placed close to the heat
sources.
• If you will place electrical equipments (which may be a heat sources) on the side surfaces of the product,
you should leave at least 10 cm of distance.
• If the product is to be placed nearby the wall, the distance between the back surface of the product and the
wall should not be less than 20 cm. (see Figure 7)
• Do not place objects in front of the ventilation filter that might prevent air intake to the product. Do not
place your product outdoor. This product is designed for use indoors.
7489.4000 7489.4005
22
4
Special ice Special ice
Air
T
R134a
335x404x590 500x580x690
415x445x780 550x630x880
www.combisteel.com
32
16
Air
T
R134a
500x580x800
556x630x990
7489.4010
47
28
Special ice
Air
T
R134a
6