Use Of Ice Maker - CombiSteel 32KG/24H Gebrauchsanweisung

Electric Connection
• Mains voltage and frequency values have to be at the voltage and frequency values written on the product.
If you need assistance in this regard, please contact your local dealer or seek support from qualified
electricians.
Make sure that your grid has a grounding unit. The fuse value of the socket to which the product will be
plugged should be 10A.
Do not use multi sockets or extension cords to start your product.
Water Use and Connection
Combisteel Ice Maker is designed for you to make ice in the most ideal time and size. However, note that there
are some criteria that will affect the quality of the ice as well as the lives of the components included in the Ice
Maker.
These criteria are;
As for the Mains Water;
Being in a drinkable quality,
Having optimum hardness degrees,
Having minimum amount of chlorine.
The optimum water filters chosen for your product are available at your local dealer.
Min. Water temperature 10°C – Max. Water temperature 30°C – Max.
Installation
Remove and disassemble all packaging materials of the product before installation.
The ice wire, waterproofing plastics and the ice scoop are provided for your valuable customers inside the
product. If any part or accessory is missing, please contact our customer services.
Clean the inner body with warm water and a soft cloth before using the ice maker.
Clean the ice trays with warm soapy water. Dry with a soft, cotton cloth. After placing the ice maker at the
assembly point, wait 2 (two) hours before operating to get the cooling system pressure stabilized.
Install the parts inside the ice maker in accordance with the assembly instructions.

4. Use of Ice Maker

Operating Ice Maker
After placing your ice maker in accordance with instructions and making connections;
1. Make sure that the electric socket that conforms to the standards has current.
2. Set the mains water tap to which you connected the product to the open position.
3. Move the On-Off button appearing on the Front of your product to the On position. (When you set it to On
position, the power lamp will light on the button.)
4. Your product will complete the ice making cycle depending on ambient temperature and feed water.
5. For changing the sizes of the ices made, change the position of the adjustment potentiometer in the arrow
direction. (see Figure 2)
6. You can access to the adjustment button by opening the front casing. (see Figure 8)
NOTE
In order to allow your product being able to make ice in the optimum size and way, you need to wait
minimum 2 hours before setting your product to the ON position.
Shutting Off Ice Maker
Set the power button appearing on the front of your Ice Maker to the "Closed" position.
Cut off the power and unplug the power cord of the product.
Cut off the water connection.
www.combisteel.com
7