FROMM & STARCK STAR ATFE 09 Montageanleitung Seite 26

Step 4
IX. Connect all cables to the sockets in the control box (8):
• connect the signal cable from the control panel to the socket (G1),
connect the power cord to the socket (G2),
•
connect the signal cable from the lifting column to the socket (G3).
•
Step 5
X. Install the desk top, control panel (7) and control box (8).
XI. The control box must be fixed to the desk top.
XII. If an extension of the cross beam is required, proceed as follows:
• loosen (L),