FROMM & STARCK STAR ATFE 09 Montageanleitung Seite 25

I. Install the cross beam (4).
II. Attach the lifting column (2) to the cross beam (4) using the wrench (F) to
tighten the screws (D).
III. Install the auxiliary beam (5)
IV. Attach the lifting column (2) to the auxiliary beam (5) using the wrench (F) to
tighten the screws (D).
Step 2
V. Install the footers (1).
VI. Connect the footers (1) to the lifting columns (2) using the wrench (F) to tighten
the screws (C).
Step 3
VII. Install the auxiliary beam (5) and the side supports (6).
VIII. Attach the auxiliary beam (5) to the support beam (4), and the specific position
can be selected according to the desk top.