Control Panel - Maltec Dh-20350 Bedienungsanleitung

5. OPERATION

5.1 CONTROL PANEL

6. POWER button
7.
Mode Button
8.
HUM Button
9. Timer button
10. Fan speed button
6. Lock button
7.
Digital Display
FUNCTION KEYS AND INDICATORS
Power button
In the standby state, Touch this button to turn on, the operation indicator lights up and the
default fan speed is high, and the default humidity is 50%. In the power-on state, Touch
this button to turn off, the running indicator light goes off and the compressor stops
immediately, and then the fan shut down after 30 seconds delay.
Mode button
Touch the mode key to switch between automatic, Sleep and dry mode.
Automatic mode: when environmental humidity ≥ set humidity +3%, the fan starts
working and compressor starts working after 3 seconds.
When environmental humidity ≤ set humidity -3%, the compressor stops working and fan
stops working after 30 seconds' delay.
Touch HUM button button to adjust the humidity level in automatic mode.
Both fan speed and humidity can be adjusted under auto mode.
Drying mode: The compressor keeps working without control by humidity; Fan works in
high speed and can not be adjusted but humidity are adjustable
Touch this button to switch the machine on or off.
Touch this button to choose Auto,Sleep and Continuous Dry mode.
Touch this button to adjust the humidity level and choose timer hour
Touch this button to s
or stop.
to select fan speed between high and low.
Touch this button
Hold this button to turn child lock function on or off.
Displays humidity value, Timer setting or Temperature.
24/ 44
et a time for the unit to automatically start