Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
LED
• To remove the lighting unit a screwdriver can be used in order to slightly press
the side part of the unit.
• Remove the unit, remove the electrical connector and replace the unit with a
new one. ("To purchase contact technical support")
Warning: This appliance is fitted with a white LED lamp classed as 1M according
to EN 60825-1: 1994 + A1:2002 + A2:2001 standards; maximum optical power
emitted @439nm: 7µW. Do not look directly at the light through optical devices
(binoculars, magnifying glasses...).
20 W halogen light.
• Extract the lamp from the lamp holder by pulling gently.
• Replace with another of the same type, making sure that the two pins
are properly inserted in the lamp holder socket holes.
Lamp
Power (W)
28
28
20
35
50
20
20
16
18
9
11
EN
Lighting unit
REPLACING OF THE LED UNIT
Lighting
LIGHT REPLACEMENT
Socket
Voltage (V)
E14
220 – 240
E14
G4
GU10
GU10
GU4
GU5.3
G13
G13
60 (lamp)
G23
220-240 (starter)
91 (lamp)
G23
220-240 (starter)
Dimension (mm)
104 x 35
230
85x25
12
33 x 9
230
51 x 50,7
230
51 x 50,7
12
40 x 35
12
46 x 51
95
720 x 26
57
589,8 x 26
167 x 28
235,8 x 28
ILCOS Code
HSGSB/C/UB-28-220/240-E14
HDG-28-230-E14-25
HSG/C/UB-20-12-G4
HAGS-35-230-GU10-51/40
HAGS-35-230-GU10-51/20
HRGS-20-12-GU4-35/30
HRGS-20-12-GU5.3-50/10
FD-16/40/1B-E-G13-26/720
FD-18/40/1B-E-G13-26/600
FSD-9/27/1B-I-G23
FSD-11/40/1B-I-G23
28
2
Werbung
Inhaltsverzeichnis
