Activation Procedure - Panasonic DMW-SFU2 Software-Upgrade-Anleitung

Activation procedure

Use the procedure below to activate the extended functions.
•
A memory card that can be used in the camera will be required to activate
the software. (Hereafter referred to as "card")
1.
Check the firmware version (
Check the firmware version of the camera.
Select the menu.
button
Firmware versions that support
the software key
(
•
For the latest information on the firmware or to download/update the
firmware, visit the following support website:
https://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
2.
Export the device information
Export the device information from the camera.
1
Insert the card into the camera.
•
Insert a card formatted with the camera.
2
Select the menu.
button
6
DVQW1648 (ENG)
[Setup]
)
DC-S1
[Setup]
[Activate]
)
DC-S1
[Others] [Firmware Version]
1.2 or higher
[Setting]
[Export Serial Code]