How To Enable Read/Write As User; How To Set The Timeout Lock In User Mode - iStorage DATASHUR PRO+ C Benutzerhandbuch

iStorage datAshur® PRO + C

7. How to enable Read/Write as User

To set the datAshur PRO
proceed with the following steps.
1. Unlock the datAshur PRO
+
GREEN LED will be solid indicating successful User PIN entry.
3. Press button number 7 followed by the number 9 button (79)
GREEN and BLUE LEDs will continue to blink.
Note: Once activated, drive access is restored to the default Read/Write state. Admin can override User
settings by enabling/disabling Read/Write in Admin mode.

8. How to set the Timeout Lock in User mode

To protect against unauthorised access in the event the datAshur PRO
and left unattended, the datAshur PRO
duration of time.
In its default state, the datAshur PRO
feature can be set to activate (lock) an idle drive anywhere between 1 and 99 minutes.
C to Read/Write in User mode,
+
C with your User PIN
C can be set to automatically lock after a pre-set
+
C Timeout Lock feature is turned off. The Timeout Lock
+
2. Press the KEY button THREE times (triple-click)
Solid GREEN LED switches to blinking GREEN and BLUE LEDs indicating
the drive is awaiting new user defined settings.
4. Press the KEY button once
GREEN and BLUE LEDs will change to a solid RED LED before switching
to a solid GREEN LED indicating successful Read/Write configuration.
C is connected to a host
+
15
User Manual v1.0