How To Use The Datashur Pro + C For The First Time - iStorage DATASHUR PRO+ C Benutzerhandbuch

iStorage datAshur® PRO C
+
Solid RED and
blinking GREEN
Reset Drive awaiting User
PIN configuration.
GREEN and BLUE
flickering together
Admin settings mode.
3. How to use the datAshur PRO
datAshur PRO C is supplied in the 'Initial Shipment State' with
+
no pre-set PIN. An 8-15 digit User PIN must be configured
before the drive can be used. Once a User PIN has been
successfully configured, it will then not be possible to revert
the drive back to the 'Initial Shipment State' .
Password Tip:
You can create a memorable word, name, phrase or any other Alphanumerical PIN combination by
simply pressing the key with the corresponding letters on it.
Examples of these types of Alphanumerical PINs are:
For "PASSWORD" you would press:
Using this method, long and easy to remember PIN's can be created.
RED and GREEN
blinking alternately
Factory reset/deleting files in
Admin mode
RED and BLUE
blinking together
When not connected to a USB port
indicates that both User and Admin
PINs have been set on the
datAshur PRO C.
+
+
RED and GREEN
flickering together
Awaiting Admin PIN entry.
RED and BLUE
flickering together
Awaiting Admin PIN change.
C for the first time
PIN Requirements:
• Must be between 8-15 digits in length
• Must not contain only repetitive numbers, e.g. (3-3-3-3-3-3-3-3)
• Must not contain only consecutive numbers, e.g. (1-2-3-4-5-6-7-8),
(7-8-9-0-1-2-3-4)
For "ISTORAGE" you would press:
GREEN and BLUE
blinking together
User settings mode.
Blinking BLUE
Awaiting User PIN change.
User Manual v1.0
10