Battery Information - SACKit Touch 300 Gebrauchsanleitung

How to use the Active Noise Cancellation function
1 . Push the ANC button on the left ear cup turning on the green LED light and you can enjoy the headp-
hones in Active Noise Cancellation mode
2 . When you don't need the Active Noise Cancellation function, turn the ANC function of by pushing the
ANC button
3 . Active Noice Cancellation can be activated and deactivated even when the SACKit Touch 300 Head-
phone is turned off. The Active Noise Cancellation will also remain on even when you turn the SACKit
Touch 300 Headphone off.

Battery information

• Battery: rechargeable Polymer Lithium-Ion Battery, DC: 3.7V/500mAh
• Power: USB DC5V, Please use the USB cable sealed with our headphone for charging
• Charging Time: For first time use please be sure the battery has been charged fully before use. It
needs more than 4 hours of charging the first time, then 2-3 hours for recharging
• When the red light is on, the headphone is in charge mode. The red light will turn off when the battery
is fully charged .
7