kbs KEENON T8 Bedienungsanleitung Seite 11

09
Boosting the New Revolution of Intelligent Unmanned Delivery | Keenon Robotics |
■ When the power cord is connected to the battery charger, do not step
on the power cord or apply excessive force to it. Do not touch the charger
for a prolonged time while charging.
■ Do not drop or step on the charger whether it is connected or not. Do
not apply excessive force to it, such as placing objects or stamping on it.
■ Only charge the robot indoors. Do not use it outdoors, such as on the
street.
■ Do not use batteries, power adapters, or charging piles from any third
party. Do not dismantle, repair, or modify the battery or charging pile
without authorization.
■ Do not cook
on the robot.
(such as bake and grill)
Otherwise, it may result in fire, injury, electric shock, damage, malfunction,
overheating, leakage or breakage.
■ Do not splash water onto the robot.
Although the robot is designed to be dust-and drip-proof, it is not completely
waterproof. If liquid spills from the tray, wipe it off immediately with a soft dry
cloth and air dry the tray. Liquid entering the robot or charging it when it is
dampened may result in overheating, electric shock, fire, injury, or malfunction.
■ Do not allow liquids such as drinks or other foreign objects to enter the
inside of the robot.
■ Do not place items that exceed the tray height and block the robot
sensors. Otherwise, it may result in malfunction or damage to surrounding
objects.
■ Do not place items that exceed the load capacity on the tray.
Otherwise, it may result in injury, malfunction, damage to surrounding objects,
or make the robot unusable.
① Load limit when using 3 trays: 5kg each for the top two trays, and 10kg
for the bottom tray.
② The maximum load is 20kg.
■ Do not remove items from a tray when the robot is moving. Otherwise, it
may result in items falling off the tray or damage to surrounding objects.
■ To ensure food sanitation, do not leave food unattended or out of reach.
■ Do not use a dish or a plate that is larger than the robot tray.
Otherwise, it may block the sensors and cause malfunction.
■ Do not use the robot in a health care environment or near electronic
medical equipment.