kbs KEENON T8 Bedienungsanleitung Seite 10

08 | Keenon Robotics Boosting the New Revolution of Intelligent Unmanned Delivery |
⑦ Near stairs or escalators.
⑧ Outdoors.
⑨ Places with strong sunlight, such as places near windows.
⑩ Areas near infrared equipment, such as automatic doors.
⑪ The aisle should be at least 0.55m for a robot to pass. An aisle with a
width greater than 1.5m allows two robots to move head-on, otherwise,
the robots will pass through the aisle one by one.
■ Do not place any ornaments as they may obstruct the robot and touch
screen operations.
■ Do not push the robot when powering on.
■ Do not use the robot in places with steps, uneven floors
(floors with
in-between gaps exceeding 3mm, floors with neighboring height difference exceeding
, sloping surfaces, or wet floors.
0.5mm, mosaic tiles, carpets, etc.)
Otherwise, the LiDAR sensor, RGB-D camera, or image module camera may not
work properly and the robot may turn over or fall down, resulting in injury or
damage to people and surrounding objects.
■ Always keep the aisle used by the robot clean.
If the robot moves over small obstacles or objects such as forks, spoons, and
chopsticks, items on trays may fall off, resulting in injury and malfunction or
making the robot unusable.
■ This wheeled robot is intended for indoor use on flat surfaces
(smooth
. Do not use it
surface with a slope less than 5 degrees and bumps lower than 0.5cm)
outdoors , rugged ground , and other
(such as open balconies) (such as stairs)
environments.
■ When charging the robot, use only the original battery charger and the
specialized power cord that came with the robot.
■ Do not push the robot when the power is on.
■ Do not use the battery charger in or near places with dust, salt, corrosive
gas, or flammable substances. Otherwise, it may result in fire, injury, electric
shock, damage, malfunction, overheating, leakage or breakage. Do not touch
any power source or voltage with wet hands apart from the adapter cable.
■ Do not use damaged battery chargers or power cords.
■ The battery charger is designed to be placed on its side. Do not use it
upright or upside down.
■ Make sure the power cord is unplugged from the socket before
maintenance or when the battery charger will not be used for an extended
period.