Kress Commercial KAC900 Bedienungsanleitung Seite 8

F2
1
2
F3
2
EN
NOTE: For better weight distribution, a weight kit
is supplied with the backpack harness.
1. LIft the ring and rotate the screw in a
counterclockwise direction, then push the weight kit
along the battery adaptor.(See Fig F2)
2. Rotate the screw in a clockwise direction to finish
the assembly of weight kit and battery adaptor. Then
insert the battery adaptor into the Kress handheld
tools.(See Fig F3)
WARNING: Before connection, make sure your
machine is turned off.
protective gloves.
REMOVE AND FIT HARNESS
Disassembly and assembly of the waist belt.
(See Fig G1,G2)
8
1
When operating, wear
G1
G2
1. Open the velcro and remove the belt from the frame
flap.(See Fig G1)
2. Insert the frame flap into the pocket on the belt.
Rotate the belt until the whole of the frame flap is in
the pocket. Secure with the velcro tab.(See Fig G2)
Disassembly and assembly of the shoulder belt.
(See Fig H1,H2)
H1
1. Press the button and release sliders from frame.
(See Fig H1)
1
2
1
2
1
2
2
1
1
2
1
1