Kress Commercial KAC900 Bedienungsanleitung Seite 7

C
It is suggested to fix the cable into the cable clips
during operation so as to avoid obstrucions by
cluttered cables.The cable clips are designed along
the shoulder belt and waist belt, which provides you
with two different ways to organize the cables.
Adjust the harness (See Fig. E1, E2,E3)
E1
a
c
f
e
E2
1
a
b
f
d
2
E3
3
1. Snap the waist buckle(d). Adjust the length of
waist strap(e) in order to make sure it is securely
positioned in your hips.(See Fig E2)
2. Tighten the shoudler strap(a)and remember to
leave a small gap over the shoulder to distribute
weight of battery over shoulders to balance weight.
(See Fig E3)
3. Snap the chest buckle(b) and adjust chest strap(c)
before work .(See Fig E3)
WARNING: Do not wear other shoulder straps when
using this backpack harness.
Connect the harness with your
machine(See Fig F1, F2)
F1
1. Insert the battery adaptor into the Kress cordless
handheld tool. Follow the instructions in the tool's
manual to start the tool.Remove the adaptor from
the tool after use.
1
2
EN
7