Introduction; Product Description (Fig. 1); Scope Of Delivery (Fig. 1A); Proper Use - Scheppach TBL400 Original Bedienungsanleitung

1.

Introduction

Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability
for damage to the product or caused by the product
arising from:
• Improper handling
• Failure to comply with the operating instructions
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts
• Application other than specified
Note:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
This operating manual should help you to familiarise
yourself with your product and to use it for its intended
purpose.
The operating manual includes important instruc-
tions for the safe, proper and economic operation of
the product, for avoiding danger, for minimising repair
costs and downtimes and for increasing the reliability
and extending the service life of the product.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the product in your country.
Keep the operating manual package with the power
tool at all times and store it in a plastic cover to pro-
tect it from dirt and moisture. They must be read and
carefully observed by all operating personnel before
starting the work.
The product may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of identical products must also be observed.
20 | GB
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.

2. Product description (fig. 1)

1. Mobile subframe
2. Lifting bar
3. Crossbar
4. Support bar
5. Cross member extension
6. Hand wheel handle
7. Hand wheel
8. Brake lever
9. Steel cable
10. Spring washer
11. Wheel
12. Locking brake
13. Spring lock
14. Support foot
15. Adjusting screw
16. Support bar holder
17. Stop hook
18. Locking pin
19. Joint lock
20. Articulated joint
21. Transport protection

3. Scope of delivery (Fig. 1a)

a. Mobile subframe (incl. wheels)
b. Lifting bar (incl. hand wheel and steel cable)
c. Hand wheel handle
d. Nut M10 x 1.5
e. Crossbar
f. Cross member extension 2x
g. Support bar 2x
h. Operating manual

4. Proper use

Only inherently stable drywall panels that do not ex-
ceed the maximum dimensions of 1220 x 4880 mm
may be used with the drywall lift. It may only be used
for short-term lifting of drywall panels.
Taking into account the technical data and safety in-
structions. Do not lift or transport other loads, animals
or people with the drywall lift. Do not exceed the load
bearing capacity of the drywall lift.
www.scheppach.com