Philips Sonicare ProtectiveClean 4100 Serie Bedienungsanleitung Seite 11

Brushing instructions
experience.
For models without intensities
To help you transition to your new Sonicare power
toothbrush, it comes with the EasyStart feature activated.
This feature gently increases the power over the first 14
brushings to help you adapt to brushing with a Philips
Sonicare toothbrush.
For models with intensities
To help you transition to your new Sonicare power
toothbrush, use a lower setting for the first 1-2 weeks
then transition to a higher setting.
1 Wet the bristles and apply a small amount of
toothpaste.
2 Place the toothbrush bristles against the teeth at a
slight angle (45 degrees), pressing firmly to make the
bristles reach the gumline or slightly beneath the
gumline.
Note: Keep the center of the brush in contact with the
teeth at all times.
3 Press the power on/off button to switch on the Philips
Sonicare.
4 Gently keep the bristles placed on the teeth and in the
gumline. Brush your teeth with small back and forth
motion so the bristles reach between the teeth.
Continue this motion throughout your brushing cycle.
Note: The bristles should slightly flare. It is not
recommended to scrub as you would with a manual
toothbrush.
11
English