Electrical Requirements - KitchenAid 5KSB40 Serie Bedienungsanleitung

PRODUCT SAFETY (CONTINUED)

ELECTRICAL REQUIREMENTS

WARNING
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire, or electrical
shock.
BLENDER FUNCTION GUIDE
It features variable speeds (from 1 to 5) and Pulse ( P ) function to customize blending. Also,
pre-programmed recipe settings like, Ice Crush ( ), Icy Drink ( ) and, Smoothie ( ) are
designed to deliver optimal results. Use the self-cleaning cycle (
clean up. We encourage you to experiment to find the best speed for your favourite recipes.
SETTING
PULSE
P
VARIABLE SPEEDS
1–5
ICE CRUSH
ICY DRINK
Voltage: 220-240 VAC
Frequency: 50-60 Hz
NOTE: If the plug does not fit in the outlet,
contact a qualified electrician. Do not modify
the plug in any way. Do not use an adapter.
Do not use an extension cord. If the power
supply cord is too short, have a qualified
electrician or service technician to install an
outlet near the appliance.
The power rating of your Stand Blender is
printed on the serial plate.
The maximum rating is based on the
attachment that draws the greatest load
(power). Other recommended attachments
may draw significantly less power.
DESCRIPTION
Allows precise control of the
duration and frequency of
blending.
Manual speeds offer
ultimate control of the
Blender.
The Blender runs at optimal
speed to crush ice.
Gradually ramp up to full
power to blend hard foods.
) after blending for easy
BLENDING TIME
(MIN:SEC)
Manual
3:00
00:30
00:30
5