Cleaning And Maintenance; Protection Of The Environment - Strend Pro INDUSTRIAL HP-NT411G Original-Gebrauchsanweisung

EN
- Turn on the detector and find the beam.
- By pressing the button
order (img.1).
- By pressing the button
- To turn off pulse mode, press and hold the button
- Store and transport the manual green laser device only in the carrying case that came with it.
- Always keep your manual green laser device clean.
- Do not immerse the manual green laser device in water or other liquids.
- Wipe off dirt with a damp soft cloth. Do not use any cleaning agents or solvents.
- In particular, clean the areas on the outlet regularly, taking care to remove any trapped fibers in the
fabric.
- If necessary, send the manual green laser device for repair in the carrying case that came with it.
The symbol of crossed out waste bin on the products or accompanying documents indicates that
used electrical and electronic products must not be added to the household waste. For proper
disposal, recovery and recycling, please take these products to designated collection points for free
shipment. Alternatively, in some countries, you may return your products to your local retailer when
buying an equivalent new product. The correct disposal of this product will help save valuable
natural resources and help prevent potential negative consequences for the environment and
human health, which could be caused by inappropriate waste handling. Contact your local authority
or nearest collection point for further details. Penalties may be imposed for incorrect disposal of this type of waste in
accordance with national regulations.
you change the illumination mode of the vertical laser beams in the following
turn on / off the horizontal laser beam (img.2).

CLEANING AND MAINTENANCE

PROTECTION OF THE ENVIRONMENT

. The pulse mode indicator turns off.