Maestro MR902 Bedienungsanleitung Seite 6

All manuals and user guides at all-guides.com
Test the blade operation by rotating it will your hand. There should be no friction with the
grill lock nut.
Mount the front grill (1) to the rear grill (3) by using the position fixer provided at the grill
rim. Clamp together with the lateral clips provided.
For desktop installation: instead of a telescopic leg, install the desktop bearing support
(20)
For wall mounting: instead of the telescopic leg, install the mounting bracket (21)
Buy in the sales network rawplug anchors (if not included in the kit). Select a suitable
place for installation on the wall near the electric point. Drill the holes, plug and screw the
anchors. Leave a gap of 3 mm between the anchor head and the wall. Faaten the wall
bracket to the installed anchors.
Control and positioning
Fan speed control:
Make sure that the switch is set to "0" position, connect the plug of the core to the electric
socket.
To operate the fan, press one of the buttons on the control panel:
Position «0» – «OFF»
Position «1» – «LOW» speed
Position «2» – «MEDIUM» speed
Position «3» – «HIGH» speed
Press the "0" button to turn the device off.
Switching on the "swinging" regime
Press button (4) "swinging" to turn the device on in the swinging regime. Pull the button (4)
up to switch this regime off.
Regulating of the fan case bending
To regulate the fan case bending relative the leg release the adjustment screw by turning
it counter clockwise, place the fan case in the desired position and tighten the adjustment
screw.
Maintenance and care
WARNING!
Before cleaning the appliance in any way, make sure that the appliance plug is not
connected to the socket.
Before cleaning turn off the fan and wait till the blades completely stop.
Never place it in water or any other liquid.
6