Error Codes And Flashing Sequences - HomeMatic IP HmIP-SMI55-2 Montage- Und Bedienungsanleitung

stances during start-up or initial installation of a system.
If the duty cycle is exceeded, this is indicated by one long
red lighting of the device LED (E), and may manifest itself
in the device temporarily working incorrectly. The device
starts working correctly again after a short period (max.
1 hour).
10.4

Error codes and flashing sequences

Flashing code Meaning
Short orange
flashing
1x long green
lighting
1x long red
lighting
Short orange
lighting (after
green or red
confirmation)
Radio trans-
mission/at-
tempting to
transmit/data
transmission
Transmission
confirmed
Transmission
failed or duty
cycle limit is
reached
Batteries
empty
Troubleshooting
Solution
Wait until the trans-
mission is completed.
You can continue
operation.
Please try again (or
see sec. „10.3 Duty
cycle" on page 46).
Replace the batteries
of the device (see „9
Replacing batteries"
on page 43).
47