Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7
Function test
The function test is only activated if the motion
detector has already been connected.
Up to 10 minutes after connecting the device or estab-
lishing the power supply (if the device has already been
connected), the device LED (E) indicates detected mo-
vements. The LED flashes green with every movement
detected. In this way, the detection range and sensitivity
can be checked directly on the device.
8
Operation
Both push-buttons (C+F) of the motion detector are de-
fined as button pairs. The upper button (C) can carry out
the functions "on/brighter/up/eco", the lower button (F)
the functions "off/darker/down/auto".
You can define the push-button functions according to
your personal needs, e.g. for comfortably switching lights
on and off or to activate or deactivate the eco mode.
9
Replacing batteries
If an empty battery is displayed via the app or the device
(see „10.4 Error codes and flashing sequences" on page
47), replace the used batteries by two new LR03/mi-
cro/AAA batteries. You must observe the correct battery
polarity.
Function test
43
Werbung
Inhaltsverzeichnis
Fehlerbehebung
