Bosch Rexroth PSI 6 C 760-Serie Typspezifische Anleitung Seite 52

52/58 Bosch Rexroth AG
Stepper mode BASIC STEPPER
At the end of the third step and the max. number of tip dresses the electrode
changes the state from "extended electrode life" to the state "Stop at extended
electrode life". At this point welding without additional release is not possible. In
this state the output "end of stepper" will be set again.
The mode of operation of the BASIC STEPPER will be documented in the
following figures. In this case the setting in Ampere was selected.
Fig.8: Stepper without tip dress, Step 1 and 2
R911336190 | PSI 6xCx.760.xx