Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connection Scheme for Camera Power Supply
Testing the System
1. If necessary, reattach the vehicle's negative battery cable.
Turn the ignition key to the accessory position, but do not
start the engine.
2. Engage the parking brake, and then put the shifter in the
reverse position.
3. Look at the monitor and check if the image matches your rear
view mirror.
Navigating in the System
When you turn on the screen the system is in recording mode.
Stop recording by pressing the UP button (2). After that you
can enter the menu with the MENU Button (1). With the MENU
Button (1) you can navigate within the top line of the menu. With
the UP (2) and DOWN (4) button you can navigate within
the lines of the menu. With the ENTER button (3) you can choose
an option. With the BACK button (5) you can return to the
previous item. By pressing the BACK button once more you leave
the menu.
Operation as Backup Camera
Please always pair the monitor and camera before the 1st
operation.
Operation
30
Werbung
Inhaltsverzeichnis
