Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Before mounting the monitor, clean the mounting surface
well.
2. Lift up the lever for the suction foot and position the suction
foot to the smooth surface which suits your requirement.
Press the suction foot down and lower the lever.
3. Snap the monitor into the holder on the mounting arm and fix
in place.
4. Adjust the mounting arm to suit your view angle to the
monitor and tighten the two knurled screws to fix the position.
Note: Under extreme bright light conditions the screen image
may take a few seconds to stabilize. Please wait until the image
has stabilized before backing up.
Installation and Operation
26
Werbung
Inhaltsverzeichnis
