Symbols On The Product; Product Liability - Husqvarna 150BT Mark II Bedienungsanweisung

21. Cable clamp
22. Intermediate pipe
23. Blower nozzle
24. Operator's manual
25. Combination wrench
26. Air purge bulb
27. High speed nozzle
28. Idle adjustment screw
29. Fan
30. Foot plate

Symbols on the product

WARNING! This product can be
dangerous and cause serious injury or
death to the operator or others. Be careful
and use the product correctly.
Read the operator's manual carefully and
make sure that you understand the
instructions before use.
Use approved hearing protection and
approved eye protection. If the
environment contains dust, use a
breathing mask.
Use approved protective gloves during
operation and maintenance. Use
protective boots or shoes with non-slip
soles. Use clothing of strong fabric and of
full length.
Make sure that long hair is put above your
shoulders.
Do not wear jewelry or loose clothing
during operation.
Mixture of gasoline and two-stroke oil.
Air purge bulb.
Keep all body parts away from hot
surfaces.
1456 - 002 - 06.05.2021
Do not go near the impeller as it turns.
Choke, open position.
Choke, closed position.
Idle adjustment screw.
This product complies with applicable EC
Directives.
Noise emissions to the environment
according to European Directive
2000/14/EC and New South Wales
legislation "Protection of the Environment
Operations (Noise Control) Regulation
2017". Noise emission data can be found
on the machine label and in the Technical
data chapter.
yyyywwxxxxx
Note:
Other symbols/decals on the product refer to
certification requirements for other commercial areas.

Product liability

As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
Look out for thrown ob-
jects. Thrown objects can
cause serious injury. Use
personal protective equip-
ment.
Keep a safety distance at
a minimum of 15 m to per-
sons or animals.
The rating plate or the la-
ser printing shows the se-
rial number. yyyy is the
production year and ww is
the production week.
3