Assembly (Once-Only Procedure); Requirements For The Test Stand; Mounting The Setting Device - Bosch ACC 101 Aufbau- Und Bedienungsanweisung

5.

Assembly (once-only procedure)

5.1

Requirements for the test stand

A B
Dimensions:
A = Accessible area behind reflector (80 cm minimum)
B = Distance of mirror from ACC (120 cm +/- 5 cm)
C = Area for vehicle (500 cm)
Maximum unevenness:
Area for placing setting device:
Area for vehicle:
Maximum angle of inclination of area for vehicle
Maximum allowable angle of inclination with
a) vehicle on upward slope:
b) vehicle on downward slope:
20
C
1 mm
10 mm
3° maximum
1° maximum
5.2

Mounting the setting device

The mirror is packed separately for safety reasons. First, fit the
mirror in the setting device.
– Press the tilting mechanism (1) and push the mirror (2) into the
opening downwards at an angle.
1
2