General Information; Application; Scope Of Delivery; Tools - Bosch ACC 101 Aufbau- Und Bedienungsanweisung

3.

General information

3.1

Application

The setting device is used for the testing and adjustment in the
workshop of ACC sensors (Adaptive Cruise Control - based on
proximity to other traffic) installed in the vehicle.
3.2

Scope of delivery

The setting device consists of the following components:
- Setting device
- Wheel laser (with batteries)
- Slotted cover
- Coarse setting device (with batteries)
- Universal quick-change clamp
- Alignment angle (for rail)
3.2.1 Condition
- Rail 1 682 319 031
3.3

Tools

- Torx screwdriver (T 20)
- Tape measure
3
Figure 1: View of test stand:
1. Coarse setting device
2. Rail (not in scope of delivery)
3. Mirror
18
1
2
4
4.

Description of device

Figure 1 illustrates the components of the setting device. The
individual components have been assigned a number, explained
in the key below the diagram.
The sections which follow contain separate descriptions of the
components, how they function and their controls.
6
5
4. Slotted cover
5. Wheel laser
6. Universal quick-change clamp