Installing The Optional Boards - Siemens simovert masterdrives Betriebsanleitung

06.2006
5.2
WARNING
Slots
Siemens AG
SIMOVERT MASTERDRIVES
Downloaded from www.Manualslib.com

Installing the optional boards

The boards may only be replaced by qualified personnel.
It is not permitted to withdraw or insert the boards under voltage.
A maximum of six slots are available in the electronics box of the unit
for installing optional boards. The slots are designated with the letters A
to G. Slot B is not provided in the electronics box. It is used in units of
the Compact PLUS type of construction.
If you wish to use slots D to G, you will additionally require the
following:
♦ Bus expansion LBA (Local Bus Adapter), which is used for mounting
the CU control board and up to two adaption boards, and
♦ An adaption board (ADB - Adaption Board) on which up to two
optional boards can be mounted.
The slots are situated at the following positions:
♦ Slot A
♦ Slot C
♦ Slot D
♦ Slot E
♦ Slot F
♦ Slot G
Fig. 5-7
6SE7087-6KN50
Operating Instructions
manuals search engine
CU control board
CU control board
Adaption board at mounting position 2
Adaption board at mounting position 2
Adaption board at mounting position 3
Adaption board at mounting position 3
Mount. pos. 1
Mount. pos. 3
Mount. pos. 2
Position of the slots in the electronics box
Installation
Position: top
Position: bottom
Position: top
Position: bottom
Position: top
Position: bottom
5-9