Handling And Use; Switching The Appliance On/Off; Adding The Food; Programming The Appliance - Silvercrest SSVS 1000 A1 Bedienungsanleitung

Handling and use

Switching the appliance on/off

Adding the food

Programming the appliance

SSVS 1000 A1
Downloaded from www.Manualslib.com
♦
Press the button
water temperature
♦
Press the button
The display will then go out .
♦
Place the vacuum bag with the prepared and vacuum-packed food in
the pot . Note that the water level must not exceed the MAX marking . If
required, ladle out the water with a cup .
NOTE
► The vacuum bags should always be covered with water during operation .
If the vacuum bags float to the surface, weigh them down with a suitable
weight (e .g . a plate) .
♦
To set the water temperature for the desired cooking process by degrees,
press the buttons + / –
is blinking . The selected temperature will appear on the display
set values between 30,0°C and 95,0°C . If you press and hold down one
of the buttons + / –
/
♦
Press the button
and you can enter the number of hours for the desired cooking time . To
do so, repeatedly press the buttons + / –
0 and 99 . If you press and hold down one of the buttons +/– / , the
number of hours will change rapidly in steps of 1 h .
♦
Press the button
desired cooking time . To do so, repeatedly press the buttons + / –
. You can set values between 0 and 59 . If you press and hold down one of
the buttons +/– / , the number of minutes will change rapidly in steps
of 1 min .
♦
Press the button
heating up and circulate the water in the pot . The temperature indicator
on the display
temperature is reached, an acoustic signal will sound . In addition, the colon
of the time indicator
time will be counted down by minutes .
♦
If you press the button
temperature will be displayed for a few seconds . The set cooking temper-
ature will flash in addition .
manuals search engine
to switch on the appliance . On the display
will flash and the time indicator
for 2 seconds if you want to switch off the appliance .
/ repeatedly while the temperature indicator
/ , the temperature will change rapidly .
. Now, the time indicator
/
. Now, you can enter the number of minutes for the
to start the program . The appliance will begin
shows the current water temperature . As soon as the set
will start to blink on the display
/
during the cooking process, the set cooking
, the set
will be lit .
. You can
is blinking on the display
/ . You can set values between
/
and the cooking
│
GB│IE
25 ■