Operating Elements (Fold-Out Page) - Conrad VC-602 Bedienungsanleitung

Operating elements
(for illustration, see fold-out page)
1 4 mm safety socket for connecting the red test lead during vol-
tage measurement up to 1000 VDC and 750 VAC rms max.
2 4 mm safety socket for connecting the black test lead = COM or
ground socket
3 4 mm safety socket "HzFOhm
lead during frequency measurements, capacity measurements,
resistance measurements and diode tests/continuity tests.
4 LC display (3 1/2-digit, highest display value: 1999)
5 Rotary switch (=measuring function switch) for selecting the
measuring functions frequency measurement, resistance mea-
surement, continuity test/diode test, capacity measurement, DC
voltage measurement, AC voltage measurement, AC current
measurement, with "OFF" position (unit off).
6 "M MAX" button for capturing the maximum value
7 "H HOLD" button for the "data hold" function (hold measured
value)
8 Current clamp area with 8a clamp opening lever, 8b hand pro-
tector, 8c clamp opening with an opening width of 57 mm max.
(to "enclose" single cables, conductor systems, etc.)
9 Battery compartment on the base of the case (one screw)
28
Downloaded from www.Manualslib.com
Never grip beyond the hand protector during the
measurement of currents. Attention! Touching elec-
trical circuits can endanger life!
For your own safety, it is essential to observe the
maximum input levels.
manuals search engine
R
" for connecting the red test