Intended Use - Conrad VC-602 Bedienungsanleitung

Intended use of the Current Clamp
VC - 602:
Measurement (by Hall-effect sensor) and display of alternating cur-
rents from 0.1 A (=100mA) to 1000 Arms max.
Measurement of direct voltages up to 1000 VDC max.
Measurement of alternating voltage up to 750 VAC rms max.
Resistance measurements up to 20 MOhm
Frequency measurements up to 40 kHz max.
Continuity test (less than 75 Ohm, acoustic) and diode test
Capacity measurements (of unipolar and bipolar capacitors) to 200
µF (199.9) max.
The instrument may not be operated when opened, with battery
compartment open, or with battery compartment missing.
Measurement in damp areas, outdoors, or in unfavourable environ-
mental conditions, is not permitted. Unfavourable ambient conditi-
ons include:
- wetness or excessive humidity,
- dust and combustible gases, fumes or solvents,
- strong vibrations,
- strong magnetic fields, as in the vicinity of machines or louds-
peakers,
- hunderstorms or storm conditions such as strong electrostatic
fields, etc.
Any use other than as described above can lead to damage to the
product, and can also produce hazards such as, for example,
short-circuit, fire, electric shock, etc. No part of the product may be
changed or modified! The safety instructions are to be followed
without fail!
Downloaded from www.Manualslib.com manuals search engine
27