Siemens sitrans LVS200 Bedienungsanleitung Seite 8

Pressure
• max 10 bar, gauge (145 psi, gauge)
Note: Pressure information for hazardous areas
The device construction allows over-pressure up to 10 bar. This pressure is allowed for
test purposes. The ATEX approval applies to over-pressure between –0.2 and 0.1 bar in
hazardous areas. For higher or lower pressures, the approval is not valid.
Approvals
Standard construction
• FM/ CSA Class II Div. 1, Group E, F, G, Class III
c
• CSA Class II Div. 2, Class III
us
• ATEX II 1/2 D (dust explosion)
• CE (see product nameplate for approval details)
Pipe extension model
• CE
Page EN-6 SITRANS LVS200 – INSTRUCTION MANUAL 7ML19985FT61