Maintenance - Siemens sitrans LVS200 Bedienungsanleitung

Switching Logic
Failsafe High Setting (FSH)
Failsafe Low Setting (FSL)
Power Failure Condition

Maintenance

SITRANS LVS200 requires no maintenance or cleaning under normal operating
conditions. Under severe operating conditions, the tines may require periodic cleaning.
Brush off any accumulated deposits, taking care not to bend the tines.
Unit Repair and Excluded Liability
All changes and repairs must be done by qualified personnel, and applicable safety
regulations must be followed. Please note the following:
• The user is responsible for all changes and repairs made to the device.
• All new components must be provided by Siemens Milltronics Process Instruments Inc.
• Restrict repair to faulty components only.
• Do not re-use faulty components.
7ML19985FT61
Probe
uncovered
covered
uncovered
covered
uncovered or covered
SITRANS LVS200 – INSTRUCTION MANUAL
Relay output
actuated
3 4 5
idle
3 4 5
idle
3 4 5
actuated
3 4 5
idle
3 4 5
LED
OFF
ON
ON
OFF
OFF
Page EN-11