Siemens SINUMERIK 840D series Installationshandbuch Seite 438

Manage MyPrograms (MMP) konfigurieren
6.9 Maschinenanschlüsse
discarded everywhere in the file)
NullDiscard=1
deleted)
TestMode=0
CNC
NCSplit=0
with line 1)
NCNameLines=5
NCNameBegin=#Name#
NCNameEnd=#End#
NCNameWPD=
NCNameType=
NCProgrammStart1=%
NCProgrammStart2=
NCProgrammStart3=
NCProgrammEnd1=M30
NCProgrammEnd2=M17
NCProgrammEnd3=
[DIALOGFUNCTION]
with line 1)
DlgScanLines=10
DlgID=%MPF9999
from DNC_NT to machine)
DlgIDSend=%MPF9998
;---DlgSendEnd---: (Program End for the answer file (list, error),
sent from DNC_NT to machine)
DlgSendEnd=M30
with releaseID)
DlgSendCmd=(S)
;---DlgSendTcCmd---: (character which indicades to download a file
with trialcutID)
DlgSendTcCmd=(ST)
;---DlgReceiveCmd---: ( character which indicades to upload a file
from machine to DNC)
438
;---NullDiscard---: 0 = NO 1 = YES (binary NULL values will
;---TestMode---: 0 = NO 1 = YES (received Tmpfile will not be
;---NCSplit---: 0= deactivated
;---NCNameLines---: (number of the signifcant lines, beginning
;---NCNameBegin---: Startmark in front of NameInfo
;---NCNameEnd---: Endmark behind NameInfo
;---NCNameWPD---: seperator between WPD and Name
;---NCNameType---: seperator between Name and Type
;
;
;
;
;
;---DlgScanLines---: (number of the signifcant lines, beginning
;---Parameters in special ASCII-Character- Words---
;---DlgID---: (Name of the dialogue file)
;---DlgIDSend---: (Name of the answer file (list, error), sent
;---DlgSendCmd---: (character which indicades to download a file
1 = SINUMERIK 840D
MMP, MMT, AMC, AMP, AMM/E, AMD
Installationshandbuch, 08/2017, A5E33520367A-AG
2 = any other