Siemens SINUMERIK 840D series Installationshandbuch Seite 436

Manage MyPrograms (MMP) konfigurieren
6.9 Maschinenanschlüsse
BaudRate = 9600
ByteSize = 8
StopBits = 1
Parity = N
FlowCtrl = RTSCTS
XONChar=17
XOFFChar=19
;---Binary---: 0= NO 1 = YES (transfermode: 0=ASCII, 1=binary)
Binary = 0
[SEND]
ProgramStart=0
ProgramEnd=0
comment)
CommentStart=40
CommentEnd=41
each file)
HeaderChar=0
each file)
TrailerChar=0
before each file)
HeaderSize=0
after each file)
TrailerSize=0
after each SpacerMark)
SpacerChar=0
before/after each SpacerMark)
SpacerSize=0
before 1. NC Programm)
SkipFirstSpacerMark=0
SpaceMarkers appear a spacer will be inserted)
SpacerMark1=
436
;---ByteSize---: 6,7,8
;---StopBits---: 1, 2
;---Parity---: No=N, Odd=O, Even=E; Mark=M; Space=S
;---FlowCtrl---: DTRDSR, RTSCTS, XONXOFF, NONE
;---XON/XOFF---: in ASCII-decimal- Code (0 ... 255)
;Program Output Parameter
;Parameters in ASCII- Dezimal- Code (0 ... 255)
;---ProgramStart---: (character, added before each file)
;---ProgramEnd---: (character, added after each file)
;---CommentStart---: (character which marks the begin of an
;---CommentEnd---: (character which marks the end of an comment)
;---HeaderChar---: (character, added "HeaderSize"-times before
;---TrailerChar---: (character, added "TrailerSize"-times before
;---HeaderSize---: (Size in Bytes to add Parameter "HeaderChar"
;---TrailerSize---: (Size in Bytes to add Parameter "TrailerChar"
;---SpacerChar---: (character, added "SpacerSize"-times before/
;---SpacerSize---: (Size in Bytes to add Parameter "SpacerChar"
;---SkipFirstSpacerMark---: 0= NO 1 = YES (to suppress Spacer
;---SpacerMarkers (max 16 Byte each)
;---SpacerMark1..3 ---: (before each line in which these
;SpacerMark3=%MPF
MMP, MMT, AMC, AMP, AMM/E, AMD
Installationshandbuch, 08/2017, A5E33520367A-AG