Bosch HTD 6 Serie Serviceanleitung Seite 48

en 48 | HTD 6xx, HTD 8xx | Component replacement
Opening light box
1. Slacken off the hexagon socket head bolt of the
display until the display housing can be lifted out.
Fig. 8: Light box
1 Display screw
2. Set down the display housing on the light box such
that the two retaining screws are freely accessible.
3. Remove the two housing screws.
4. Secure the display housing again at the light box.
|
1 692 106 011 2014-06-23
5. Fold the back of the light box to the rear.
6. Remove the screws of the acrylic glass cover.
7. Press the front centre of the cover and then remove
the cover.
8. Fold the back of the light box to the rear.
Robert Bosch GmbH