of the power socket; never unplug the appliance by pulling on the
power cord.
•
Any changes to this product not expressly authorised by the manufac-
turer may make safety devices inoperative and will also render the
user's warranty null and void.
Pos. Description
A
Steam dispenser button
B
Lock cursor
C
Gun
D
Gun nozzle
E
Operating light
Pos. Description
Wand nozzle
①
Round brush
②
Angled nozzle
③
Nozzle attachment
④
Multipurpose brush
⑤
Window wiper
⑥
Floor brush attachment
⑦
Filling the boiler tank before use
•
Unscrew the safety cap (I) and use the funnel provided (11) to pour in a measure (12) of
water filled up to the MAX level and another measure of water, filled up to 500 cc. (Fig. 1).
Pour the water very slowly through the funnel to avoid the formation of air bubbles inside the
boiler tank, which could cause water to spill out of the tank while it is being filled.
•
Screw on the safety cap (I).
•
Fit the required tool (see the "
Switching on
•
Plug the appliance into a mains socket and press the on/off switch (G); the red light (E)
will switch on (Fig. 2).
•
After a few minutes, the green light (F) will switch on to show that the steam is ready, mean-
ing that the tank is pressurised and that the appliance is ready to dispense steam.
DESCRIPTION Of THE APPLIANCE
DESCRIPTION Of ATTACHMENTS
INSTRUCTIONS fOR USE
ATTACHMENTS" paragraph) to the gun (C).
Pos. Description
F
Steam ready light
G
On/off switch
H
Body with boiler tank
I
Safety cap
J
Handle
Pos. Description
Floor brush
⑧
Extension tubes
⑨
Attachment bag
⑩
Funnel
⑪
Measure
⑫
Floor cloth
⑬
Cover for multipurpose brush
⑭
GB
IT
GB
45