Maintenance and Cleaning
Before undertaking maintenance work switch off the demolition
hammer.
Clean the machine with a moist cloth or absorbent tissue.
Do not allow liquids of any kind to enter the machine when
cleaning the machine.
Regularly clean dust, debris and old grease off the tool chuck.
After longer periods of non-use or when starting the machine
up in sub-freezing temperatures, allow the machine to run
without load for a few minutes to distribute the lubricant within
the machine.
Inspect the oil filling of the
transmission in regular inter-
vals.
Position
hammer upright so the oil can
collect on one place. If there is
less than 3 mm oil in the
camper,
chamber cap (6) with the
included spanner (9) and re-fill
fresh machine oil. After re-
filling, carefully tighten the chamber cap. Use SAE: 10W-30
oil.
If it is necessary to open the housing for further maintenance
and repair work, please have it done by a qualified profes-
sional or contact the Westfalia customer service.
Maintenance and Cleaning
the
demolition
unscrew
the
oil
3 mm
18