Frequently Asked Questions (Faqs) - Hama PN40HD Bedienungsanleitung

g
Fault
No sound can
be heard
No colour is
displayed

Frequently asked questions (FAQs)

Question 1. When I want to disconnect the USB device, the
message "The device 'Generic data medium' cannot be discon-
nected at present .
Answer:
Close all programs including Windows® Explorer that may be ac-
cessing data on the device . If this does not help, please close all the
programs and wait another 20 seconds; then try to disconnect the
USB device again by clicking the green arrow . If that still does not
help, switch off the device and then disconnect the USB cable .
Question 2. File and folder names exist that I have not created,
or the names are some strange gibberish .
Answer:
The file allocation table (FAT) of the device has most probably been
corrupted . This can occur if the device is disconnected while reading
or writing from/to your computer via USB cable . Windows and Mac-
intosh often write separate files, such as finder.def or "Data medium
information of the system" onto the hard disk. These are normal files
and do not indicate that anything is wrong with your device .
150
Possible cause Remedy
Press the MUTE button
Device switched to
on the remote control to
mute
cancel the mute setting .
No audio connec- Ensure that an additional
tion with compo- audio connection has
nent video been made .
Set the correct TV norm
Wrong TV norm
(PAL/NTSC) in the setup
selected
menu .
Wrong colour
Correct the colour setting
settings on the
on the television .
television
Troubleshooting
PN40HD