Changing Audio Settings; Night Mode; Navigating - Hama PN40HD Bedienungsanleitung

g

Changing audio settings

You can configure the playback for audio files in this menu.

Night mode

Select the submenu "Audio" and the menu item "Night mode"
‹
as described in the section "Opening the setup menu and

navigating" .

The selected menu item with the corresponding setting values (set-
ting options) appears on the screen .
You can activate audio compression or deactivate linear compression
of the outgoing audio signal under the "Night mode" menu item . The
following options are available here:
On
Off
Comfort
Use the
‹
value (desired setting option) .
Press the
‹
the setting .
106
Select this option if the audio signal is to be transmitted
without amplification. This setting is particularly suit-
able if you wish to listen to music at night because the
volume is relatively low .
Select this setting if the audio signal is to be stronger .
This setting is more suitable for music playback during
the day because the volume is high .
Select this option if the audio signal is to be transmitted
according to user-defined settings.
▼▲ navigation buttons to select the desired setting
Enter button to confirm the selection and activate
Operation
PN40HD