Hama PN40HD Bedienungsanleitung Seite 120

g
Activating NAS mode
You can activate the NAS function in this menu . When the NAS
function is activated, you can access storage media (USB, eSATA)
connected via the network .
Select the submenu "Network" and the menu item "NAS mode"
‹
as described in the section "Opening the setup menu and
navigating" .
The selected menu item appears on the screen .
Use the
‹
ting .
Press the
‹
Entering the Host name
You can enter the designation under this menu item which is used for
accessing the deice within a network when the the NAS function is
activated .
Select the submenu "Network" and the menu item "Host name"
‹
as described in the section "Opening the setup menu and
navigating" .
The virtual keyboard appears on the screen .
Refer to the section Entering the WEP-/WPA key for using the
virtual keyboard .
120
▼▲ navigation buttons to activate/deactivate this set-
Enter button to confirm the selection .
Operation
PN40HD