Upgrading The Firmware - Hama PN40HD Bedienungsanleitung

g
You can then view and edit the files stored on the hard disk of the
device . In this way it is also possible to play back the files using the
network or to copy files between the PC and the device .
NOTE
► Ensure that the "NAS" function is activated in the setup menu .

Upgrading the firmware

The firmware is installed on the device as an operating system (OS).
A firmware upgrade means that new elements, improvements and
bug-fixes are added to the existing operating system.
To install a new firmware version, proceed as follows:
Copy the file 'install.img' or the expansion files to the main direc-
‹
tory of the USB stick, then connect the stick to the USB port of
the device .
Switch off the device by pressing the ON/OFF button and remove
‹
the power cable of the mains adapter from the DC IN socket on
the back of the device .
Keep the ON/OFF button on the front of the device pressed; do
‹
not release it .
Insert the power cable into the DC IN socket and wait 15 sec-
‹
onds or longer . Then release the ON/OFF button .
The firmware is installed. Information on another method of installa-
tion can be found under "Changing system settings – Upgrading
the system" in the section "Setup menu" .
NOTE
► New firmware versions can be found at www.hama.com
148
Operation
PN40HD