Warranty Provisions - ABB TZIDC Betriebsanleitigung

LCI adapter FOR DIGITAL POSITIONERS TZIDC | OI/LCI-ADAPTER/POSITIONER-XA REV. A
Change from one to two columns
1 Safety
General information and instructions
These instructions are an important part of the product and
must be retained for future reference.
Installation, commissioning, and maintenance of the product
may only be performed by trained specialist personnel who have
been authorized by the plant operator accordingly. The specialist
personnel must have read and understood the manual and must
comply with its instructions.
For additional information or if specific problems occur that are
not discussed in these instructions, contact the manufacturer.
The content of these instructions is neither part of nor an
amendment to any previous or existing agreement, promise or
legal relationship.
Modifications and repairs to the product may only be performed
if expressly permitted by these instructions.
Information and symbols on the product must be observed.
These may not be removed and must be fully legible at all times.
The operating company must strictly observe the applicable
national regulations relating to the installation, function testing,
repair and maintenance of electrical products.
Warnings
The warnings in these instructions are structured as follows:
DANGER
The signal word 'DANGER' indicates an imminent danger.
Failure to observe this information will result in death or
severe injury.
WARNING
The signal word 'WARNING' indicates an imminent danger.
Failure to observe this information may result in death or
severe injury.
CAUTION
The signal word 'CAUTION' indicates an imminent danger.
Failure to observe this information may result in minor or
moderate injury.
NOTICE
'NOTICE'
The signal word
Note
'Note' indicates useful or important information about the
product.
indicates possible material damage.
Intended use
The LCI adapter is an interface converter used to link a
connected TZIDC type digital positioner with a PC / laptop.
The LCI adapter is connected to the USB interface on the PC and
the local communication interface (LCI) of the TZIDC.
The LCI adapter may only be used in a non-hazardous area.
Improper use
The following uses of the LCI adapter are considered to be
impermissible:
• Operation in hazardous areas
• Operation beyond the specifications provided
• Connection to devices other than the ABB TZIDC
Notes on data security
This product is designed to be connected to and to
communicate information and data via a network interface.
It is operator's sole responsibility to provide and continuously
ensure a secure connection between the product and your
network or any other network (as the case may be).
Operator shall establish and maintain any appropriate measures
(such as but not limited to the installation of firewalls,
application of authentication measures, encryption of data,
installation of anti-virus programs, etc.) to protect the product,
the network, its system and the interface against any kind of
security breaches, unauthorized access, interference, intrusion,
leakage and / or theft of data or information.
ABB Automation Products GmbH and its affiliates are not liable
for damages and / or losses related to such security breaches,
any unauthorized access, interference, intrusion, leakage and /
or theft of data or information.

Warranty provisions

Using the device in a manner that does not fall within the scope
of its intended use, disregarding this manual, using
underqualified personnel, or making unauthorized alterations
releases the manufacturer from liability for any resulting
damage. This renders the manufacturer's warranty null and void.
Customer service center
Tel: +49 180 5 222 580
Mail: automation.service@de.abb.com
EN – 3
3