Cleaning And Maintenance - Westfalia 28 31 19 Bedienungsanleitung

Cleaning and Maintenance


Before maintaining or cleaning the laser drill machine, switch off and unplug
from power mains. Never work on the machine while in operation.

After each use clean the machine thoroughly and lubricate moving parts
slightly. Clean the machine with a hand broom, a suitable chip removal hook
or with compressed air to remove dust, dirt, shavings or swarf. Do not remove
swarf with your hand.

Periodically lubricate the pinion (part no. 10) and the sleeve (part no. 23) in
order to ensure good lubrication.

To avoid corrosion, oil all blank parts of the laser drill machine from time to
time.

Keep drill bits etc. always sharp and clean for best performance. Preferably
store each drill bit separately.

Do not clean the surfaces with abrasive detergents or aggressive chemicals.

Make sure that moisture or liquids cannot enter the machine.

The bearings and the gears of the laser drill machine are maintenance-free
and do not require any lubrication.

Store the laser drill machine in a dry and dust free location.
Cleaning and Maintenance
27