Safety Notes - Westfalia 28 31 19 Bedienungsanleitung

Please note the included General Safety Notes and the
following safety notes to avoid malfunctions, damage or
physical injury:

Make sure the voltage corresponds to the type label on the unit.

Persons with limited physical, sensorial or mental abilities or lack of
know-how and/or lack of knowledge are not allowed to use the unit,
unless they are supervised for their safety by a qualified person or are
briefed by the responsible person how to use the unit.

Only operate the laser drill machine on a grounded wall socket.

Only use approved extension cable with a cable quality of at least 1.5
2
mm . Ask your electrician. Unroll the extension cable from the cable
drum. Never use a damaged extension cable.

The laser drill machine is designed for drilling metal, wood, plastic and
similar materials. Please observe the appropriate working speed for
the resp. materials.

Keep the drill bits and cutting tool clean and sharp at all times and do
not use cutting tools that are not designed for this job.

Only use the machine for domestic purposes and in the way indicated
in these instructions. The machine is not designed for continuous,
professional use.

Do not drill harmful materials for this laser drill machine.

Always keep the power cord away from the moving parts of the laser
drill machine.

Do not allow the laser drill machine to work unattended. If not in use,
switch off the machine.

Do not operate the laser drill machine in damp environment and do not
allow moisture to enter the machine.

Do not operate the laser drill press close to combustible liquids or
gases. There is risk of explosion!

Always fix the workpiece when drilling. Never hold the workpiece to be
drilled with your hands.

Maintaining or cleaning the laser drill machine is only allowed if the
spindle has stopped completely. Additionally unplug from power
mains.

Safety Notes

5