On/Off Switch; Setting The Impact Frequency; Drilling/Chiselling; Maintenance And Cleaning - Westfalia 77 49 01 Bedienungsanleitung

ON/OFF Switch

The ON/OFF switch (6) is situated on the handle. Press down the ON/OFF
switch to switch on the machine. Release the ON/OFF switch to switch off the
machine.

Setting the Impact Frequency

Use the rotation switch (4) to set
the machine to drilling or impact
drilling mode. The switch turns the
pneumatic function on or off.
Use the switch only while the motor
is not running.

Drilling/Chiselling

Use the rotation switch (3) to turn the
rotating function of the machine on or
off. With this you can switch from
impact drilling
prevent accidental change, the switch
is equipped with a safety button.
Before using the switch, press the red
button.
Use the switch only while the motor is
not running.

Cleaning and Maintenance

 Always keep the machine clean,
Make sure the ventilation louvers
are clean and free from obstruc-
tions.
 Clean the machine with a soft, or
lightly moistened cloth.
 Never immerse the machine in
liquids of any kind. Do not allow
liquids to enter the machine.
Operation
to chiselling. To
12