Safety Notes; Functional Description; Intended Use; English | 11 - Bosch GPL 3 Professional Originalbetriebsanleitung

OBJ_BUCH-807-002.book Page 11 Tuesday, September 30, 2008 1:13 PM

Safety Notes

en
Point Laser
Working safely with the measuring
tool is possible only when the op-
erating and safety information are
read completely and the instruc-
tions contained therein are strictly
followed. Never make warning labels on the
measuring tool unrecognisable. SAVE THESE
INSTRUCTIONS.
Caution – The use of other operating or
adjusting equipment or the application of
other processing methods than those
mentioned here, can lead to dangerous
radiation exposure.
The measuring tool is provided with a warn-
ing label in English (marked with number 5
in the representation of the measuring tool
on the graphics page).
IEC 60825-1:2007-03
< 1 mW, 635 nm
Do not direct the laser beam at
persons or animals and do not
stare into the laser beam your-
self. This measuring tool produces
laser class 2 laser radiation ac-
cording to IEC 60825-1. This can
lead to persons being blinded.
Do not use the laser viewing glasses as
safety goggles. The laser viewing glasses are
used for improved visualisation of the laser
beam, but they do not protect against laser
radiation.
Bosch Power Tools
Do not use the laser viewing glasses as sun
glasses or in traffic. The laser viewing glass-
es do not afford complete UV protection and
reduce colour perception.
Have the measuring tool repaired only
through qualified specialists using original
spare parts. This ensures that the safety of
the measuring tool is maintained.
Do not allow children to use the laser meas-
uring tool without supervision. They could
unintentionally blind other persons or them-
selves.
Holder
Keep the holder 8 away from
cardiac pacemakers. The mag-
nets 12 generate a field that can
impair the function of cardiac
pacemakers.
Keep the holder 8 away from magnetic data
medium and magnetically-sensitive equip-
ment. The effect of the magnets 12 can lead
to irreversible data loss.

Functional Description

Please unfold the fold-out page with the repre-
sentation of the measuring tool and leave it un-
folded while reading the operating instructions.

Intended Use

The measuring tool is intended for determining
and checking horizontal and vertical lines as
well as plumb points.
1 609 929 S08 | (30.9.08)

English | 11