Herunterladen Diese Seite drucken

Kenwood GE-810 Bedienungsanleitung Seite 34

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Before applying power
Important!
Europe and U.K.
Units shipped to Europe are designed for operation on
220 volts AC.
Units shipped to U.K. are designed for
operation on 240
volts AC.These units are not equipped
with an AC voltage selector switch and the discussion of
such a switch that follows should be disregarded.
All other countries
Units shipped to countries other than the above coun-
tries are equipped with an AC voltage selector switch
on the rear panel.
Refer to the following paragraph for the proper setting
of this switch.
AC voltage selection
This unit operates on
110-120 volts or 220-240 volts AC.
The AC voltage selector switch on the rear panel is set to the
voltage that prevails in the area to which the unit is shipped.
Before connecting the power cord to your AC outlet, make
sure that the setting position of this switch matches your line
voltage.
If not,
it
must
be
set
to
your
voltage
in
accordance with the following direction.
Note:
Our warranty
does
not cover
damage
caused
by excessive
line
voltage due to improper setting of the AC voltage selector switch.
2 GE-810 (U)
AC110-120V~-< » AC220-240V~
AC110-120V~< » AC220-240V~
o=o
La
©
This shows switch
This shows switch
lever is locked in
lever is locked in
110-120V~
220-240V~
position.
position.
Move
switch
lever
to
match
your
line
voltage with a small screw driver or other
pointed tool.
AC voltage selector switch
For United Kingdom
The mains plug must be removed from the wall socket
prior to any internal examination.
Important
The wires in this mains lead are coloured in accordance
with the following code:
BlWG
ster ccceiiedotouterk
ooandes Neutral
BrOWN ecco
Acdite cetestneatehas
Live
The wires in this mains lead must be connected to the
terminals in the plug as follows:
Wire colour
Plug terminal marking
BlUG? st atecsaspehstthogte Mawveds:
N or Black
BrOWN's ctitieuteeseseilanvae bee L or Red
Brown to
Live
Blue to
Neutral
Plug
Notes:
1) if a 13-amp plug is used, this must be fitted with a 5-amp
fuse.
2) If a 3-pin plug with earthing contact is used, no wire must
be connected to the £ terminal.
Safety
precaution
for
AC
plug
(For
U.S.A.and Canada)
CAUTION:
To PREVENT ELECTRIC SHOCK DO NOT
USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE:
-

Werbung

loading