Silvercrest KH 2381 Bedienungsanleitung Seite 52

D
Remote control
POWER/DIM
3^
: Switch device on and off/
dim display illumination
SEL
3&
: Access settings for volume, bass, treble,
balance and fader
3* / : Title/station search backwards/forwards
MODE/LOUD
3(
: Set operation mode/loudness
function
VOL+/-
4) : Volume increase/decrease
AS/PS/MP3
4!
: Automatic station memory/
MP3 search
6/D-UP
4@ : Station button 6/next directory
5/D-DN
4#
: Station button 5/previous directory
TA/TP
4$
: ("Traffic Announcement"): Activate traffic
radio station
PTY
4%
: ("Program Type") Search for station by PTY
group
4^ Battery compartment
MUTE
4&
: Switch off sound
DISP
4*
: Show display information
SCAN/REC
4( : Automatic station search/Record to
a data carrier at the USB port or the
SD/MMC card slot
5) RDM/4
: Random playback in the
CD/MP3/WMA operation mode/
number button 4
5! INT/3
: Intro function in the CD/MP3/WMA
operation mode, number button 3
RPT/2
5@ : Repeat function in the CD/MP3/WMA
operation mode/ number button 2
PAU/1
5#
: Playback start or stop/ number button 1
BAND/ENTER
5$ : Select band range/confirm selection
E
Case for face plate
F
Key for installation bracket
G
Bezel frame
H
Installation bracket
All manuals and user guides at all-guides.com
Installation
If you want to install your car radio yourself follow
the installation and connection instructions in this
manual.
Installation instructions
• Try connecting the cable to perform a function
• Insert the device in the slot provided for it or select
• In the event that changes to the vehicle are ne-
• Install the device in such a way as to avoid injuries
• If the device is installed with more than a 30° in-
• Avoid installation of the device in the vicinity of
Connection
- 50 -
test before finally installing the device. Make
sure that it is plugged in properly and that the
system functions correctly.
a location for mounting the device that does not
obstruct the driver during normal operation of
the vehicle.
cessary contact your vehicle dealer/qualified
radio installation facility.
in the event of harsh braking.
clination it could lead to function disorders.
high temperature sources (i.e. direct sunlight or
heating vents) or dusty and dirty locations. Do
not subject the device to excessive vibration.
Note:
Make sure that a permanent positive connection
is applied to the station memory of connection
7 in the ISO block A.
You can connect an external amplifier to the
audio cinch output LINE OUT or an external
sound source to the audio cinch input LINE IN.
When doing so, please follow the operating
instructions of the external amplifier/sound
source.