Werbung
Verfügbare Sprachen
Verfügbare Sprachen
When recording immediately after ATRS operation
1. Operate as described in 1—4, ATRS operation.
2. Operate as described in 4—14, Recording from a stereo system.
When recording using previous ATRS data
1. Set the Power switch ( to ON and insert the cassette.
2. Press the correct Tape select button @3) to match the type of tape.
3. Press the ATRS button (9.
Check that the ATRS button lights at this time.
If it does not light, it shows that data is
not held in memory for this type of tape.
In this case, use ATRS.
. Operate as described in 4— 14, Recording from a stereo system.
Tape standby function
Recording from microphones
' Insert two microphones into the Microphone sockets @) .
Note: Set the Input select switch @0 to "MIC".
E7
Werbung
